[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [iaik-jce] SMime Mapper Test Problem



You have enabled authentication via the IDENT protocol in your INI file.
Unless you actually want to use that and have an IDENT server installed
on your machine you should place a comment at the line
"iaik.smime.proxy.ident-user"

 Andreas Sterbenz              mailto:Andreas.Sterbenz@iaik.tu-graz.ac.at

-----Ursprüngliche Nachricht-----
Von: Malderez Cédric <cmz@netsecuresoftware.com>
An: IAIK JCE mailing list <iaik-jce@iaik.tu-graz.ac.at>
Gesendet: Freitag, 22. Oktober 1999 10:45
Betreff: [iaik-jce] SMime Mapper Test Problem


> Hello !!
>
> I've downloaded, recently, your SMime Mapper product.
> I've installed it the 06 October 1999.
> I've edited the smime.ini, as described in the pdf doc, in order to
test
> it.
> I've a CA certificate, a User Certificate and its private key.
> I've a SMTP Server listening on 127.0.0.1:26.
> I've a POP3 Server listening on 127.0.0.1:111.
> The SMimeMapper SMTP proxy is listenning on 127.0.0.1:25.
> The SMimeMapper POP3 proxy is listenning on 127.0.0.1:110.
>
> My problem is:
> - When I send a Mail to myself (just for test), my SMTP client returns
> an error: 'Not authorized ... refused."
> - I've tried with a Telnet client on 127.0.0.1:25 and it returns
> directly '502 You have no permission to talk.  Goodbye.' and
disconnect.
>
> What can I do ???
> I've talk yesterday, by mail, with  Mr Peter Lipp and we could not make
> it work ... !!
>
> Here is my smime.ini file:
>
> # IAIK S/MIME Mapper 1.4 property file
> # SMTP server host; required
> iaik.smime.smtp.host = 127.0.0.1
>
> # SMTP server port; default 25
> iaik.smime.smtp.port = 26
>
> # POP3 server host; required
> iaik.smime.pop3.host = 127.0.0.1
>
> # POP3 server port; default 110
> iaik.smime.pop3.port = 111
>
> # local IP address or DNS name to bind to for multihomed hosts
> # default is all local addresses
> iaik.smime.proxy.bindaddress = 127.0.0.1
>
> # local SMTP proxy port to listen on; default 25
> iaik.smime.proxy.smtp.port = 25
>
> # local POP3 proxy port to listen on; default 110
> iaik.smime.proxy.pop3.port = 110
>
> # policy preferences for outgoin messages, format
> "emailaddress:cipher:sign"
> # possible cipher values: "plain", "RC2/40", "RC2/64", "RC2/128",
"DES",
> "TripleDES"
> # possible values for sign: "plain", "signed"
> #iaik.smime.proxy.cipher = *:TripleDES:signed
> iaik.smime.proxy.cipher = *@iaik.tu-graz.ac.at:RC2/128:signed
>
> # policy preferences for incoming messages, same format as above
> # if an incoming message does not satisfy the policy a warning message
> will
> # be displayed
> iaik.smime.proxy.receive-preferences =
> *@iaik.tu-graz.ac.at:RC2/128:signed
>
> # the private-key type: "MSIE", "Netscape", "PKCS#8"; required
> iaik.smime.proxy.private-key.type = PKCS#8
>
> # filename of private key; required
> iaik.smime.proxy.private-key.file = certs/smimekey.p8
>
> # password of the private key, if not specified a dialog window will
> appear
> iaik.smime.proxy.private-key.password =
>
> # time in minutes after which the password must be re-entered
> # only applies if password is not given in this file. default -1
> (forever)
> iaik.smime.proxy.private-key.password.timeout = -1
>
> # your email address, required when private-key.type is PKCS#8, ignored
> otherwise
> iaik.smime.proxy.email = smimetest@iaik.tu-graz.ac.at
>
> # trusted certificates, any number of user and CA certificates can be
> specified
> iaik.smime.proxy.user.cert=certs/caCert.der
> iaik.smime.proxy.user.cert=certs/my-certificate.pem
>
> # the certificate store file; optional
> iaik.smime.proxy.cert-store = certs/certStore.ser
>
> # LDAP servers to use for searching user certificates
> #iaik.smime.proxy.ldap-server = *INSERT LDAP SERVER*/l=internet
>
> # temporary directory for large emails; default current directory
> #iaik.smime.proxy.temp-directory = c:\temp
>
> # whether or not to allow SMTP/POP3 connections from hosts other than
> localhost
> # specify either true or false; default false, should be true only for
> testing
> iaik.smime.proxy.allow-remote-connection = true
>
> # additional access control via the Identification protocol
> # if you want to use ident, enter your username here
> iaik.smime.proxy.ident-user = smimetest
>
> # Log file for errors, default none
> iaik.smime.proxy.errorlog = error.log
>
> # format for warning messages, either HTML or ASCII (default ASCII)
> iaik.smime.proxy.warning-format = HTML
>
> # activate/ deactivate the administration server,
> # allows shutdown via the shutdown.bat. default on
> iaik.smime.proxy.admin-server = on
>
> # display a dialog that allows the user to override the policy if no or
> no
> # trusted certficate is available for the recipient of an encrypted
> message.
> # set to false to disable/ for GUI less operation
> iaik.smime.proxy.allow-override = true
>
> # enable/disable check of the email address sent by the agent during
the
>
> # SMTP mail from command. disable if your mailer does not send your
full
>
> # email address at the SMTP level.
> iaik.smime.proxy.check-smtp-from = false
>
>
> Thanks for helping !!
>
> Sincerely.
>


smime.p7s